Any shortcut makes life a little easier in the cutting fabric up and sewing it back together department, right? Patchwork is awesome, but less seams is better. When I decided to make my own plus quilt, my immediate thought was just to cut a whole lot of squares, and assemble the + from those. Hang on a minute…. Why use all squares? Why not use 2 squares and a rectangle. You will save yourself two seams per plus, as well as the extra fabric hidden, and indeed wasted, in those seam allowances.
For my plusses to be 4″ finished across the arms, I calculated that each plus would require 2 4 1/2″ squares, and one rectangle 12 1/2″ long by 4 1/2″ wide.
Firstly press your fat quarter and trim off the selvedge edge. I used a generous trim as I am saving these for a special project.
Moving across from that cut, make 4 parallel 4 1/2″ cuts across your fat quarter.
You will have some wastage at the other end, however the strip is wide enough to be useful in a future scrap project!
Taking three of those strips, stack them very neatly together, aligning the sides carefully. I slide my 12 1/2″ inch ruler just past all the uneven edges on the left, and make my first cut on the right. Then you spin the whole stack and square off those edges.
Finally, using a similar process you will cut three more 4 1/2″ squares from the last strip. The piece under the rotary cutter in the picture above is your wastage, and usually measures just on 5″. Hold onto this, as these pieces are very useful if you need to fill in some end gaps on your final layout.
Now you simply repeat the process over all your fat quarters. If you have a directional print, you may have to cut your strips out from the selvedge instead of across it. I was only able to get two full plusses cutting in this direction, with a lot of wastage.
If you are cutting yardage, such as a solid to mix in with your fat quarters, you will simply cut 4 1/2 in strips across the fabric in the normal way. Just make sure that for every 12 1/2″ rectangle you cut, you will need two 4 1/2″ squares to match.
Laying everything out, you can see that I didn’t bother trimming any excess pieces from the sides. They will come off after it is quilted and squared up but in the meanwhile, they help keep things in line. Here I simply folded them back on themselves to allow me to visualise the straight line up the sides.
To piece, it is easiest to stack every row up, left to right. I worked in batches of 4 rows, stitching them by column, then the 4 rows together before moving on to the next batch. This made keeping the design in order very simple. Press each row to the side, alternating directions as you work through them. That will help keep the rows nested together when joining.
What makes this process even easier is that there are less seams to match up when you are joining the rows. In a traditional square layout, every 4 inches you will have a seam intersection to line up. Using rectangles, there is an average of 3 seam intersections per row joined. This is perfect, as it allows you to keep things straight and lined up, however there is enough space in between them to allow for a little “easing” if things aren’t quite right.
So, with two less seams per plus, less wastage of your precious fabric, and less seam matching to do, I would say this is definitely an easier way to make a plus. Wouldn’t you? Have you made one of these quilts? Do you have any advice for everyone or hints that made it easier for you?
Please be aware that there may be affiliate links in this content. Your support allows me to keep creating for you!